Spider-Gwen - Amazing Yamaguchi No.004 - Revolte...Spider-Gwen - Amazing Yamaguchi No.004 - Revoltech (Kaiyodo)

Buy

Releases

Pictures

Loading...

© Kaiyodo / Marvel / Yamaguchi Katsuhisa

View moreComments (44)

06 hours agoSolarisJapanSolarisJapan
In stock @ Solaris Japan (¥6,350)

Brand New for ¥6,350
└ Carefully packed with ♥
#23757802 // Sponsored by Solaris Jap...
08 hours agoPLAMOYAPLAMOYA
#23752694 // Sponsored by Plamoya (MF...
016 hours agoNinomaNinoma
In stock @ Ninoma (¥6,120)

Product page : [ext link ]
Official new item , shipped worldwide from Japan
About 54 USD | 49 EUR | 73 CAD
#23735191 // Sponsored by Ninoma
018 hours agoPlazaJapanPlazaJapan
In stock @ PlazaJapan
Check out our product page for more details → [ext link ]
#23732342 // Sponsored by PlazaJapan
01 day agoTwinkieSupremeTwinkieSupreme
goliathfasa (1 day ago) #23710370Finally got time to take some pictures and post them.
My guess is also that the hole in the lower leg piece is set at an off angle. The revol joint itself looks to be fine.
(mfc link)
(mfc link)


From the looks of it, it's highly likely due to the drilled hole on the leg. The position's a bit lower than how it's supposed to be placed.
01 day agogoliathfasagoliathfasa
TwinkieSupreme (5 days ago) #23523028Hmmmm. could you put up some pictures? My hunch is either the joint's range is off or that the drilled hole is at a off angle. Both of which are somewhat rare but are very evident in Revoltech figures. QA for Revoltech tends to be a mixed bag.
Finally got time to take some pictures and post them.

My guess is also that the hole in the lower leg piece is set at an off angle. The revol joint itself looks to be fine.

(mfc link)
(mfc link)
15 days ago (5 days ago)Spartan719Spartan719
goliathfasa (5 days ago) #23520158Well one leg straightens out perfectly, while the other one seems bent at an angle.
And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?


Pop off the right hip part (that connects the thigh to the t-bar) and check for an "L" on the inside. I think I had the same problem. Mine had 2 left hips, so the left leg was perfect, but the right leg always was off

[Edit]

Whoops, Didn't see you said lower leg. Problem might be he same. QC might have messed up and given you 2 lower left legs
15 days agoTwinkieSupremeTwinkieSupreme
goliathfasa (5 days ago) #23520158Well one leg straightens out perfectly, while the other one seems bent at an angle.
And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?


Hmmmm. could you put up some pictures? My hunch is either the joint's range is off or that the drilled hole is at a off angle. Both of which are somewhat rare but are very evident in Revoltech figures. QA for Revoltech tends to be a mixed bag.
05 days agogoliathfasagoliathfasa
TwinkieSupreme (6 days ago) #23508750Is that the knee joint? If it is, it's a case to case basis but from my experience with Revoltech figures, their joint system or joints per se don't always have the same range. You'll have to work around it if you want to give Revoltech figures vanilla poses.
Well one leg straightens out perfectly, while the other one seems bent at an angle.

And I think it's the knee. Maybe the socket at the lower leg where the knee revo joint goes in is set crooked?
06 days ago (6 days ago)TwinkieSupremeTwinkieSupreme
goliathfasa (6 days ago) #23507662Ok been playing tons with mine, but for some reason, the right lower leg seems to bend way more inward (medially), compared to the right one, when both are straightened out.
Not sure if this is a single-case thing, or across the board.


Is that the knee joint? If it is, it's a case to case basis but from my experience with Revoltech figures, their joint system or joints per se don't always have the same range. You'll have to work around it if you want to give Revoltech figures vanilla poses.

View more comments

Community

Related Clubs (0)

View moreLists (8)