Loading

Comments Where can I find some decent stand-arm attachments?

  • CreepyOldMan11 months ago#70146528If you are still wiling to give claw clamps a second chance, I would recommend: www.bigbadtoyst...

    It's looking like most of the potential replacements are different claw clamps. XD; These do look like they could be useful, though!
    11 months ago
    If you are still wiling to give claw clamps a second chance, I would recommend: www.bigbadtoyst...
    11 months ago
    nyugvo611 months ago#70136841www.amiami.com/...
    I hope this helps, if not the alternatives I can offer won't be much help either.
    the SHF stands are very good in my experience, at least the ones they sell separately. I'm not lucky with the ones included with the figures either.


    Don't know about my Sailor Moon figs specifically (they use the exact kind of claw-clamp I want to replace), but these could be useful for my other Figuarts. :)

    Devastator00111 months ago#70140300encrypted-tbn0....
    Fext Display stand is good alternative, relatively cheap too


    I will definitely keep these in mind, thanks! ^^
    11 months ago
    encrypted-tbn0....

    Fext Display stand is good alternative, relatively cheap too
    11 months ago
    www.amiami.com/...
    I hope this helps, if not the alternatives I can offer won't be much help either.
    the SHF stands are very good in my experience, at least the ones they sell separately. I'm not lucky with the ones included with the figures either.
    11 months ago
    kyoshinhei11 months ago#70081470I don't own any Figuarts so I'm not very knowledgeable about them but can't the claw be tightened with a screwdriver like the joints on a Figma stand?
    Or maybe I'm misunderstanding your question and it's not about the claw holding the figure tight but rather stopping the claw from rotating around its peg on the arm? If that's the case you could try thickening the peg with superglue and baking soda to make it a tighter fit. I talk about this technique towards the end of this article. See if that could suit your needs.


    Figuarts claws can't really be tightened that way, I think (they're separate from the stand arms) and I haven't really had trouble with them being too loose on the pegs. I'll still take a look at that article in case there's a situation where I'd need to do that, though!

    Basically--you know the stand-arm attachment (for lack of a better phrase) that came with Test Suit Asuka? Those or something similar would be my ideal replacement for the claws.
    11 months ago
    I don't own any Figuarts so I'm not very knowledgeable about them but can't the claw be tightened with a screwdriver like the joints on a Figma stand?

    Or maybe I'm misunderstanding your question and it's not about the claw holding the figure tight but rather stopping the claw from rotating around its peg on the arm? If that's the case you could try thickening the peg with superglue and baking soda to make it a tighter fit. I talk about this technique towards the end of this article. See if that could suit your needs.
    11 months ago
  • 7 comments
Your source for old and rare figurines!