Loading
HomeArticlesArticle #44165Comments

Where can I find some decent stand-arm attachments?Comments • Where can I find some decent stand-arm attachments?

  • 1pt
    CreepyOldMan (13 days ago) #70146528If you are still wiling to give claw clamps a second chance, I would recommend: www.bigbadtoyst...

    It's looking like most of the potential replacements are different claw clamps. XD; These do look like they could be useful, though!
    13 days ago
    2pt
    If you are still wiling to give claw clamps a second chance, I would recommend: www.bigbadtoyst...
    13 days ago
    1pt
    nyugvo6 (14 days ago) #70136841www.amiami.com/...
    I hope this helps, if not the alternatives I can offer won't be much help either.
    the SHF stands are very good in my experience, at least the ones they sell separately. I'm not lucky with the ones included with the figures either.


    Don't know about my Sailor Moon figs specifically (they use the exact kind of claw-clamp I want to replace), but these could be useful for my other Figuarts. :)

    Devastator001 (13 days ago) #70140300encrypted-tbn0....
    Fext Display stand is good alternative, relatively cheap too


    I will definitely keep these in mind, thanks! ^^
    13 days ago
    2pt
    encrypted-tbn0....

    Fext Display stand is good alternative, relatively cheap too
    13 days ago
    2pt
    www.amiami.com/...
    I hope this helps, if not the alternatives I can offer won't be much help either.
    the SHF stands are very good in my experience, at least the ones they sell separately. I'm not lucky with the ones included with the figures either.
    14 days ago
    1pt
    kyoshinhei (14 days ago) #70081470I don't own any Figuarts so I'm not very knowledgeable about them but can't the claw be tightened with a screwdriver like the joints on a Figma stand?
    Or maybe I'm misunderstanding your question and it's not about the claw holding the figure tight but rather stopping the claw from rotating around its peg on the arm? If that's the case you could try thickening the peg with superglue and baking soda to make it a tighter fit. I talk about this technique towards the end of this article. See if that could suit your needs.


    Figuarts claws can't really be tightened that way, I think (they're separate from the stand arms) and I haven't really had trouble with them being too loose on the pegs. I'll still take a look at that article in case there's a situation where I'd need to do that, though!

    Basically--you know the stand-arm attachment (for lack of a better phrase) that came with Test Suit Asuka? Those or something similar would be my ideal replacement for the claws.
    14 days ago
    2pt
    I don't own any Figuarts so I'm not very knowledgeable about them but can't the claw be tightened with a screwdriver like the joints on a Figma stand?

    Or maybe I'm misunderstanding your question and it's not about the claw holding the figure tight but rather stopping the claw from rotating around its peg on the arm? If that's the case you could try thickening the peg with superglue and baking soda to make it a tighter fit. I talk about this technique towards the end of this article. See if that could suit your needs.
    14 days ago
  • 7 comments
Live better. Play more!