Loading
HomeDatabasesItem #569161

Bishoujo Senshi Sailor Moon Crystal Season III - Sailor Saturn - Figuarts ZERO (Bandai)Bishoujo Senshi Sailor Moon Crystal Season III - Sailor Saturn - Figuarts ZERO (Bandai)

Bishoujo Senshi Sailor Moon Crystal Season III - Sailor Saturn - Figuarts ZERO (Bandai)
Category
Classification
Character
Materials
Scale & Dimensions
H=173mm (6.75in)
Release date
09/22/2017 As Limited + Exclusive
Price
Japanese9,815 hits • 125 comments12 likes

Buy

Information

Orders can be placed at Tamashii Webshop between the 21st April 2017 from 13:00JST until the 20th June 2017 at 23:00JST.

Full height with glaive: 259mm(25,9cm)

Comments125 comments

1pt
Mykombini 6990 JPY

mykombini.com/e...
20 days ago
4pt
The quality is soooo bad, the glaive don't fit..... I'm so disappointed with her :-(
1 month ago
2pt
Mizu05 (2 months ago) #29266887My Saturn came today and I think the quality is fine, not the best but 'ok'. It's so sad that the glaive didn't fit in her hand... ._. Saturn is my favourite character ;-;

Same lol the glaive of mine doesn't fit either. I think we all have this problem
2 months ago
3pt
My Saturn came today and I think the quality is fine, not the best but 'ok'. It's so sad that the glaive didn't fit in her hand... ._. Saturn is my favourite character ;-;
2 months ago
1pt
straywind (3 months ago) #28704928Yup. I'm right up there with everyone else regarding the quality of this figure. I wasn't sure what I was going to end up with and in the box she seemed alright, but wow, is Bandai asking the people who make bootlegs to make their figures now?? This is probably the only scale figure (that's not a prize figure) that I own to have so many glaring flaws. Mine is mostly alright but she does have some weird, clear circle markings on her base, she had paint marks on the back of one leg and the front of her skirt is mega marked up. It has like 4 pink dots and a couple of silver streaks on it. That's bootleg level looking!
I was able to mostly remove the paint marks on her leg using a Mr Clean Magic Eraser, but a white eraser and the magic eraser did nothing to remove the marks on her skirt. ~_~ The only other figure from this specific Figuarts Zero line that I own is Sailor Moon and she also had tons of flaws, but at least they were fairly distributed so she still looks fine overall. The fact Saturn has so many spots on her skirt makes her look like a fake. That's really pretty sad. Thankfully her face looks nice and from a foot away she's alright but close up it's depressing. I don't know if I should complain to Amazon because if I did exchange her the next one I get could be the same or worse. Just wow, Bandai.
And, like everyone else is noticing, her glaive is pretty wonky. I spent like 2 minutes trying to figure out the placement before giving up and cutting a mounting square to hold the glaive in her lower hand. The upper hand just can't snuggly grip the staff so there's no way to secure the lower hand to the staff. The square isn't really working so I'll have to cut another piece.
I still think the design is pretty and I like her pose, but my goodness, was anyone involved with quality control for this??! I had to pay $83 for her and it was definitely a waste of money for that price. For $50 I could maybe give it a side eye pass, but if I one day try to sell her what price could I even ask?! She's official, there is a sticker on the box that says so. Sorry it looks like someone stuck a bootleg in the official box....


I literally needed to put some coins between her skirt and arm and leave it there for a while to put the arm in the right position for the glaive... I only have one complaint: the ribons on her boot were not painted -.- After that its pretty good (than I was expecting). I cost me around 55$uds
https://static.myfigurecollection.net/image/OuterSaturn1511615735.jpeg
2 months ago
2pt
SlickMajestic (3 months ago) #28704068You'll need to superglue her glaive into her hand for it to rest properly. Use good plastic glue. Otherwise, its in line with the other Crystal Scouts for Figuarts.

That’s what I did. I used hot glue so I won’t damage it when I take it off but there was no way it’d stay properly without glue. Piece of crap
3 months ago
1pt
Yup. I'm right up there with everyone else regarding the quality of this figure. I wasn't sure what I was going to end up with and in the box she seemed alright, but wow, is Bandai asking the people who make bootlegs to make their figures now?? This is probably the only scale figure (that's not a prize figure) that I own to have so many glaring flaws. Mine is mostly alright but she does have some weird, clear circle markings on her base, she had paint marks on the back of one leg and the front of her skirt is mega marked up. It has like 4 pink dots and a couple of silver streaks on it. That's bootleg level looking!

I was able to mostly remove the paint marks on her leg using a Mr Clean Magic Eraser, but a white eraser and the magic eraser did nothing to remove the marks on her skirt. ~_~ The only other figure from this specific Figuarts Zero line that I own is Sailor Moon and she also had tons of flaws, but at least they were fairly distributed so she still looks fine overall. The fact Saturn has so many spots on her skirt makes her look like a fake. That's really pretty sad. Thankfully her face looks nice and from a foot away she's alright but close up it's depressing. I don't know if I should complain to Amazon because if I did exchange her the next one I get could be the same or worse. Just wow, Bandai.

And, like everyone else is noticing, her glaive is pretty wonky. I spent like 2 minutes trying to figure out the placement before giving up and cutting a mounting square to hold the glaive in her lower hand. The upper hand just can't snuggly grip the staff so there's no way to secure the lower hand to the staff. The square isn't really working so I'll have to cut another piece.

I still think the design is pretty and I like her pose, but my goodness, was anyone involved with quality control for this??! I had to pay $83 for her and it was definitely a waste of money for that price. For $50 I could maybe give it a side eye pass, but if I one day try to sell her what price could I even ask?! She's official, there is a sticker on the box that says so. Sorry it looks like someone stuck a bootleg in the official box....
3 months ago
1pt
You'll need to superglue her glaive into her hand for it to rest properly. Use good plastic glue. Otherwise, its in line with the other Crystal Scouts for Figuarts.
3 months ago
1pt
I was able to get her from Hottopic (weird right?) for $50 and she's in stock on OtakuMode for $50 right now (11/15/2017)

That being said I was excited, but my excitement dimmed a bit when I git her. She's pretty, no doubt but her quality when you look closely is "meh". And like others have said, her glaive does not rest on her left hand; it hovers over it if you position the glaive right. Overall, I'm not sure if I'll be keeping her; we'll see.
3 months ago
View more comments
Dream Goods Built For You!

Pictures88

Related Items

Community

Owned by
Ordered by
Wished by
Listed in
Average rating
8.11/10 rated 19 times

Related Clubs

Changelog 5

Added by
Siona 10 months ago
Last edited by
Kaneel 5 months ago