Loading
HomeDatabasesItem #718192

Vocaloid - Hatsune Miku - 2nd season Winter ver. (Taito)Vocaloid - Hatsune Miku - 2nd season Winter ver. (Taito)

Vocaloid - Hatsune Miku - 2nd season Winter ver. (Taito)
Category
Origin
Character
Material
Scale & Dimensions
H=180mm (7.02in)
Release date
11/15/2018 As Prize
Japanese12,643 hits • 90 comments20 likes

Buy

Comments90

Selected Comments
45pt
The season themed Mikus are so cute but why are they all like 5 y/o
9 months ago
36pt
Her face looks absolutely DERANGED
6 months ago
Recent Comments
1pt
Very impressed with the quality of these Taito prize figures. This is my second, they all seem to feature a gradient on their hair. It's subtle on this one but I appreciate the detail. Really love their soft color palettes aswell. Wasn't sure about her as I usually like more serious characters but she's really cute in person! Like others have said, one of her foot pegs was a good 8mm or so from the hole. The leg was flexible enough that I got it in without much trouble. Atleast she's in there securely as the Halloween versions peg is on the loose side.
14 hours ago
1pt
Just got my replacement from amiami, no more broken feet!! And the new one I got has no problem going on the base at all
1 month ago
1pt
-
1 month ago
1pt
Just got mine and both sides of the Hair are broken :/ so disappointed..
1 month ago
1pt
Honestly this figure is just too cute, I tried winning it several times in Japan and I am absolutely gutted I never got it :(
1 month ago
1pt
I didn't have any problem with the feet, except having to turn her a bit, nothing out of the ordinary. Maybe it was only certain batches?
2 months ago
2pt
In the end I managed to get it into the original holes and push the peg in far enough that it isn't visible from normal viewing direction...as long as I don't put her on a higher shelf it'll be fine. The leg still looks kinda unnatural but it's not that bad. I hope it won't break...
Unfortunately by then however I already made the extra hole on the base and it's visible - what's worse I couldn't use it, the overall balance of the figure was bad, it was slightly leaning backward. So this shows the legs really were meant to be in the "official" position, not the one they actually came in.
It's a really nice figure but they could have prevented this major problem if they bothered to put blister on the bottom half of the figure. There is no way the legs can bend a whole centimeter forward that way.
2 months ago
1pt
Seravy (2 months ago) #47404748Finally received her but the holes on the base are so far away from the actual position of her legs there is no way I'm going to risk trying to force it in - even if successful, it'll break from the strain soon after. I might need to somehow make an additional hole. While the holes and pictures show the two legs should be next to each other, mine is in a pose where she is putting her right leg forward.
Edit : she seems to be similar to what is on that unboxing video except in my case the distance is like double of that. Basically when one leg is in the correct position the other's heel is above the hole instead of the peg at the front.
I tried and while I managed to somehow get the other feet into the hole it still doesn't work - one of the legs ends up being about 3mm higher up than the other so only a small fraction of the peg actually slides in - her leg is too short in that position.
I can't avoid making a new hole it seems...


Have you tried using a hairdryer on her legs to warm them up? That's what GSC recommends if parts do not fit together.
2 months ago
1pt
Finally received her but the holes on the base are so far away from the actual position of her legs there is no way I'm going to risk trying to force it in - even if successful, it'll break from the strain soon after. I might need to somehow make an additional hole. While the holes and pictures show the two legs should be next to each other, mine is in a pose where she is putting her right leg forward.
Edit : she seems to be similar to what is on that unboxing video except in my case the distance is like double of that. Basically when one leg is in the correct position the other's heel is above the hole instead of the peg at the front.
I tried and while I managed to somehow get the other feet into the hole it still doesn't work - one of the legs ends up being about 3mm higher up than the other so only a small fraction of the peg actually slides in - her leg is too short in that position.
I can't avoid making a new hole it seems...
2 months ago
2pt
came to me with two snapped off feet TT hopefully amiami helps me

edit: Amiami had me send her back for a replacement :D
2 months ago
View more comments

Pictures54

Related Items

Community

Owned by
Ordered by
Wished by
Listed in
Average rating
8.85/10 rated 33 times

Related Clubs

Changelog 5

Added by
DrSeehund 9 months ago
Last edited by
BadWolfVindici 4 months ago