Fate/Grand Order - Ereshkigal - 1/7 - Lancer (Aniplex)Fate/Grand Order - Ereshkigal - 1/7 - Lancer (Aniplex)¥ Buy¥ Buy

Best Goods from Japan
Fate/Grand Order - Ereshkigal - 1/7 - Lancer (Aniplex)
Scale & Dimensions
1/7  H=260mm (10.14in, 1:1=1.82m)
Release date
04/24/2020 As Limited + Exclusive
Japanese47,877 hits • 255 comments113 likes



Orders via Aniplex+ can be placed between the 10th February 2019 from 10:00JST to the 24th March 2019 at 24:00JST.

Height including spear: 330 mm


In stock @ Nin-Nin-Game (¥38,990)
Brand New! => Fate/Grand Order - Ereshkigal / Lancer Limited Edition [Aniplex]
~325.29 € / ~$383.62
└ +5% Points on all Orders!
└ Worldwide Express Shipping! ✈
How do you put the back support? If I put it, I can't fix the weapon on the base. Can you help me please? I would like to be able to put the back support in order that the figure is stable.

It's good, I resolved this issue:

1. Put Ereshkigal on the base
2. Put the spear on the base (pull down gently)
3. Put the support under the cape and put on base (you have to force a little, it raises the cape but it's normal)

1 day ago
In stock @ Solaris Japan (¥35,995)

Brand New for ¥35,995
└ At our shop you are always a ★
Pre Owned for ¥32,545
└ Check product page for item condition.
She just arrived today! If anyone would like to purchase her brand new and sealed feel free to message me!
3 days ago
FluffyTeddyBear16 days ago#82745568Anyone have any ideas or have used anything to prevent the problems with the lance?

in my case, i try to bend the male lance a little until the male anchor 1/4 break, i pour a little with acrylic glue and coated the rest male junction with , but be carefull don't too much for coating it, and last, try to ignore the hole on the base since it make the lance easier to bend, with my case for experiment, it works.

last thing, mind at your risk before to do it ^^

hope this can help you
3 days ago
Mine just came in from TOM. It survived the boat ride.
4 days ago
Mine should finally be arriving this week. I’m most likely going to be selling her new and unopened if anyone is looking to purchase in the US.
7 days ago
FluffyTeddyBear16 days ago#82745568Anyone have any ideas or have used anything to prevent the problems with the lance?

This is going to sound janky as hell, but I used a Bandai Action Base 4 stand and the claw grip to hold the lance in place. It can be found on Amazon.

It's bulky and pretty ugly for now, but it will keep the lance in place for sure until I can figure out a better solution. Maybe a GPU sag brace?
8 days ago
Takamina5912 days ago#82937003When I get mine from TOM I'll drill tf outta her lance and put an acrylic rod in to prevent my babey Eresh from breaking ;д;//

Oh my please be very careful the lance isn’t meant to be taken off of the hand it’s also one piece and not two separate pieces. In order for you to put a rod in you’ll have to break it. :(
10 days ago
goliathus16 days ago#82745001Is her neck supposed to be flexible?
ran into the same issue
11 days ago